Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 801/1568
7.11.1.7 show ip bgp neighbors
This command displays information about Border Gateway Protocol (BGP) and TCP connections to
neighbors.
Syntax
show ip bgp neighbors [<ip-address> [advertised-routes | policy | received-routes | rejected-routes |
routes] | policy]
ip-address -
Displays information about the IPv4 neighbor. If this argument is omitted, information
about all neighbors is displayed.
policy -
Display inbound and outbound policies for all neighbors or the specified neighbor.
advertised-routes -
Display routes advertised to a neighbor.
received-routes -
Display routes received from a neighbor.
rejected-routes -
Display routes rejected by inbound policy.
routes -
Display routes accepted by inbound policy.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Remote Address:
The IP Address of the Peer's BGP interface.
Remote AS:
Autonomous system number of the neighbor.
Peer ID:
Router ID of the neighbor.
Peer Admin Status:
States whether BGP is enabled or disabled of the neighbor.
Peer State:
Finite state machine (FSM) stage of session negotiation.
Local Port:
The port number of the local port.
Remote Port:
The port number of the remote port.
Connection Retry Interval:
Time interval, in seconds, at which the device resend messages to this
neighbor.
Neighbor Capabilities:
BGP capabilities advertised and received from this neighbor.
IPv4 Unicast Support:
Support IPv4 unicast packets or not. The valid value will be Both, Sent,
Received or None.
IPv6 Unicast Support:
Support IPv6 unicast packets or not. The valid value will be Both, Sent,
Received or None..
Template Name:
Name of a locally configured peer policy template.
