2-14
Return to
2600AS-901-01 Rev. B / September 2008
Section 2: DUT Test Connections
Series 2600A System SourceMeter® Instruments Reference Manual
Figure 2-19
Model 2636A High-impedance guarding (non-floating)
Noise shield
A noise shield (see
) is used to prevent unwanted signals from being induced into the
test circuit. Low-level signals may benefit from effective shielding. The metal noise shield
surrounds the test circuit and should be connected to SMU LO as shown in
Figure 2-20
Models 2602A and 2612A noise shield
DUT
HI
LO
Noise Shield
CHANNEL A
LO
G
LO
HI G G G HI
S
S
KEITHLEY Series 2600A
Noise shield
connected to
In/Out LO