Keithley 2600a series Скачать руководство пользователя страница 409

Страница: 409 / 696

2600AS-901-01 Rev. B / September 2008

Return to

Section Topics

19-87

Series 2600A System SourceMeter® Instruments Reference Manual

Section 19: Remote Commands

localnode.gettimezone

Function

Retrieves the local time zone.

TSP-Link
accessibility

This function can be accessed from a remote TSP-Link node.

Usage

timezone = localnode.gettimezone()

timezone

Returns the timezone.

Remarks

• See

localnode.settimezone

for additional details on the time zone format and a description

of the fields.

•

timezone

can be in either of the following formats:

•

GMThh:mm:ss

•

GMThh:mm:ssGMThh:mm:ss,Mmm.w.dw/hh:mm:ss,Mmm.w.dw/hh:mm:ss

• The first format is returned if one argument was used with

localnode.settimezone

• The second format is returned if four arguments were used with

localnode.settimezone

localnode.linefreq

Attribute

Power line frequency.

Default

TSP-Link
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

frequency = localnode.linefreq

--Reads line frequency.

localnode.linefreq = frequency

--Writes line frequency.

frequency

Set to 50 or 60.

Remarks

• To achieve optimum noise rejection when performing measurements at integer NPLC apertures,

the line frequency setting must match the frequency (50Hz or 60Hz) of the AC power line.

• When used in an expanded system (TSP-Link),

localnode.linefreq

is sent to the remote

master node only. Use

node[n].linefreq

(where

is the node number) to send the command

to any node in the system. See

Section 14

for details on TSP-Link.

• When this attribute is set, the

localnode.autolinefreq

attribute is

automatically set to false.

Also see

localnode.autolinefreq

Example

Sets the line frequency to 60Hz:

localnode.linefreq = 60

localnode.model

Attribute

The instrument model.

TSP-Link
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

model = localnode.model

-- Reads the node model.

model

The model number of the instrument.

Remarks

• This is the model number of the instrument.

Also see

localnode.description

localnode.revision

localnode.serialno

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2600a series

Отзывы:

Keithley 2600a series, Справочное руководство, Страница: 409 / 696

Результаты поиска

Содержание 2600a series

Отзывы: