Keithley 2600a series Скачать руководство пользователя страница 536 | Manualshive

Страница: 536 / 696

Keithley 2600a series Скачать руководство пользователя страница 536

19-214

Return to

Section Topics

2600AS-901-01 Rev. B / September 2008

Section 19: Remote Commands

Series 2600A System SourceMeter® Instruments Reference Manual

tsplink.reset

Function

Initializes (resets) all nodes (instruments) in the TSP-Link system. Also returns the number of
nodes found.

TSP-Link
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

nodes_found = tsplink.reset()

nodes_found = tsplink.reset(expected_nodes)

expected_nodes

The number of nodes expected on the system.

nodes_found

The number of nodes actually on the system.

Remarks

• This function will erase all knowledge of other nodes connected on the TSP-Link and will

regenerate the system configuration. This function must be called at least once before any
remote nodes can be accessed. If the node number for any instrument is changed, the TSP-Link
must again be initialized.

• The value of

expected_nodes

must be a number between 1 and 64. If the

expected_nodes

parameter is not given, this function will generate an error if no other nodes are found on the
TSP-Link network.

• If the actual number of nodes is less than the expected number, an error is generated. Note that

the node on which the command is running is counted as a node. For example, giving an
expected node count of 1 will not generate any errors, even if there are no other nodes on the
TSP-Link network.

Details

See

Also see

,

tsplink.state

Attribute

TSP-Link on-line state.

TSP-Link
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

state = tsplink.state

state

Indicates the TSP-Link status.

Remarks

• This attribute stores the TSP-Link status, either “

online

” or “

offline

.” The state will be

“

offline

” after the unit is powered on. After

tsplink.reset

is successful, the state will be

“

online

.”

• This attribute is read-only.
• State is shown as a return value.

Details

See

Also see

,

Example

Reads the on-line state of the TSP-Link:

state = tsplink.state

print(state)

Output:

online

«
...
534
535
536
537
538
...
»

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов