Keithley 2600a series Скачать руководство пользователя страница 348

Страница: 348 / 696

19-26

Return to

Section Topics

2600AS-901-01 Rev. B / September 2008

Section 19: Remote Commands

Series 2600A System SourceMeter® Instruments Reference Manual

bit.get

Function

Retrieves the weighted value of a bit at a given index position.

TSP-Link
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

value = bit.get(value1, index)

value1

Given

number.

index

Index position of the bit to be retrieved (1 to 32).

value

Returned weighted value of the bit.

Remarks

• This function returns the value of the bit in

value1

at the given index. This is the same as

returning

value1

with all other non-indexed bits set to zero.

• Prior to retrieving the indexed bit, any fractional part of the given number will be truncated to

make it an integer. The least significant bit of the given number has an index of 1 and the most
significant bit has an index of 32.

• If the indexed bit for the number is set to 0, the result will be 0.
• See

Logic and bit operations

for more information.

Also see

Example

The binary equivalent of decimal 10 is 1010. Getting the bit at index position 4 will return decimal

value

value = bit.get(10, 4)

print(value)

Output:

8.00

bit.getfield

Function

Returns a field of bits starting at a given index position.

TSP-Link
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

value = bit.getfield(value1, index, width)

value1

Given

number.

index

Index position of the first bit; 1 to (33 –

width

Field width – number of bits to be included in the

field; 1 to 24.

value

Returned value of the bit field.

Remarks

• A field of bits is a contiguous group of bits. This function retrieves a field of bits from

value1

starting at the given

index

position. The

index

position is the least significant bit of the

retrieved field. The number of bits to return is given by

width

• Prior to retrieving the field of bits, any fractional part of the given number will be truncated to

make it an integer.

• The least significant bit of the given number has an index of 1 and the most significant bit has an

index of 32.

• See

Logic and bit operations

for more information.

Also see

Example

The binary equivalent of decimal 13 is 1101. The field at

index2

and

width3

consists of the

binary bits 110. The returned

value

will be decimal 6 (binary 110):

value = bit.getfield(13, 2, 3)

print(value)

Output:

6.00

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2600a series

Отзывы:

Keithley 2600a series, Справочное руководство, Страница: 348 / 696

Результаты поиска

Содержание 2600a series

Отзывы: