Keithley 2600a series Скачать руководство пользователя страница 347

Страница: 347 / 696

2600AS-901-01 Rev. B / September 2008

Return to

Section Topics

19-25

Series 2600A System SourceMeter® Instruments Reference Manual

Section 19: Remote Commands

bit.bitxor

Function

Performs a bitwise logical XOR (Exclusive OR) operation on two numbers.

TSP-Link
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

value = bit.xor(value1, value2)

value1

First number for the XOR operation.

value2

Second number for the XOR operation.

value

Returned result of the XOR operation.

Remarks

• This function performs a logical Exclusive OR operation on two numbers.
• Any fractional parts of

value1

and

value2

are truncated to make them integers. The returned

value

is also an integer.

• See

Logic and bit operations

for more information.

Also see

bit.bitand

bit.bitor

Example

XOR’ing decimal 10 (binary 1010) with decimal 9 (binary 1001) will return a

value

of decimal 3

(binary 0011):

value = bit.bitxor(10, 9)

print(value)

Output:

3.00

bit.clear

Function

Clears a bit at a given index position.

TSP-Link
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

value = bit.clear(value1, index)

value1

Given

number.

index

Index position of the bit to be cleared (1 to 32).

value

Returns the result of the manipulation.

Remarks

• This function clears a bit at a given index position.
• Any fractional part of

value1

is truncated to make it an integer. The returned

value

is also an

integer.

• The least significant bit of the given number is at index 1. The most significant bit is at index 32.
• See

Logic and bit operations

for more information.

Also see

Example

The binary equivalent of decimal 15 is 1111. If you clear the bit at index position 2, the returned
decimal

value

would be 13 (binary 1101):

value = bit.clear(15, 2)

print(value)

Output:

1.01

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2600a series

Отзывы:

Keithley 2600a series, Справочное руководство, Страница: 347 / 696

Результаты поиска

Содержание 2600a series

Отзывы: