manualshive.com logo in svg

Keithley 2600a series, Справочное руководство, Страница: 454 / 696

Поделиться
Скачать
Keithley 2600a series Скачать руководство пользователя страница 454

19-132

Return to 

Section Topics

2600AS-901-01 Rev. B / September 2008

Section 19: Remote Commands

Series 2600A System SourceMeter® Instruments Reference Manual

smuX.source.compliance

X = SMU channel (a or b)

Attribute

Source compliance state.

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

compliance = smuX.source.compliance

compliance

  

The state of source compliance.

Remarks

• Use this attribute to read the state of source compliance. 

true

 indicates that the limit function is 

in control of the source (source in compliance). 

false

 indicates that the source function is in 

control of the output (source not in compliance).

• This is a read-only attribute. Writing to this attribute will generate an error.
• Reading this attribute also updates the status model and the front panel with generated 

compliance information.

Details

See 

Section 3

 and 

Appendix C

. 

Also see

smuX.source.limitY

Example

Reads the source compliance state for SMU A:

compliance = smua.source.compliance

print(compliance)

Output: true
The above output indicates that the voltage limit has been reached (if configured as a current 
source), or that the current limit has been reached (if configured as a voltage source).

smuX.source.delay

X = SMU channel (a or b)

Attribute

Source delay.

Default

smuX.DELAY_OFF

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

delayval = smuX.source.delay   -- Reads source delay.

smuX.source.delay = delayval   -- Writes source delay.

delayval

The source delay value.

Set 

delayval

 to one of the following values:

0 

or

 smuX.DELAY_OFF 

No delay.

-1

 or 

smuX.DELAY_AUTO 

Auto delay.

User_value

Set user delay value.

Remarks

• This attribute allows for additional source settling time after an output step.
• The default is 0, no delays.
• Setting this attribute to 

smuX.DELAY_AUTO

 will cause a range dependent delay to be inserted 

when ever the source is changed.

•

delayval

 can be set to a specific user-defined value (

User_value

) that will set the delay that 

is used regardless of range.

Example

Selects the delay to auto SMU A:

smua.source.delay = smua.DELAY_AUTO

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов