manualshive.com logo in svg

Keithley 2600a series, Справочное руководство, Страница: 460 / 696

Поделиться
Скачать
Keithley 2600a series Скачать руководство пользователя страница 460

19-138

Return to 

Section Topics

2600AS-901-01 Rev. B / September 2008

Section 19: Remote Commands

Series 2600A System SourceMeter® Instruments Reference Manual

smuX.source.outputenableaction 

X = SMU channel (a or b)
(2601A/2602A only)

Attribute

Output enable action for the source.

Default

smuX.OE_NONE

 (2601A/2602A only)

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

action = smuX.source.outputenableaction   -- Reads enable action.

smuX.source.outputenableaction = action   -- Writes enable action.

action

The source output action.

Set 

action

 to one of the following values:

0

 or 

smuX.OE_NONE

 No 

action. 

1

 or 

smuX.OE_OUTPUT_OFF

 

Turns the source output off.

Remarks

• This attribute controls the SMU action taken when the output enable line is asserted/deasserted. 

The default setting is 

smuX.OE_NONE

.

• When set to 

smuX.OE_NONE

, the SMU will take no action when the output enable line goes low 

(deasserted). 

• When set to 

smuX.OE_OUTPUT_OFF

 and the output enable line is de-asserted, the SMU will 

turn its output off as if the 

smuX.source.output = smuX.OUTPUT_OFF

 command had been 

received.

• The SMU will not automatically turn its output on when the output enable line returns to the high 

state.

• If the output enable line is not asserted when this attribute is set to 

smuX.OE_OUTPUT_OFF

 and 

the output is on, the output will turn off immediately.

• Detection of the output enable line going low will not abort any running scripts. This may cause 

execution errors.

Details

See 

Output enable (Models 2601A/2602A)

 in 

Section 8

.

Also see

smuX.source.offmode

, 

smuX.source.output

Example

Reconfigures the SMU to turn the output off if the output enable line goes low (deasserted):

smua.source.outputenableaction = smua.OE_OUTPUT_OFF

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов