manualshive.com logo in svg

Keithley 2600a series, Справочное руководство, Страница: 192 / 696

Поделиться
Скачать
Keithley 2600a series Скачать руководство пользователя страница 192

10-22

Return to 

Section Topics

2600AS-901-01 Rev. B / September 2008

Section 10: Triggering

Series 2600A System SourceMeter® Instruments Reference Manual

Accessing the event log from the command interface

The Instrument Control Library (ICL) can be used to view the event log from any command 
interface. The event log must be enabled before LXI trigger events can be viewed. 

To enable the event log: 

eventlog.enable = 1

To view the event log from a remote interface: 

print(eventlog.all())

This command returns one or more strings similar to the following: 

14:14:02.000 17 Jun 2008, LAN0, 10.80.64.191, LXI, 0, 1213712000, not available, 0, 0x10,0x00

The string displays the same information as the web interface. Commas separate the different 
fields. The fields are returned in the following order: 

•

UTC  time

•

Event Id 

•

Sender 

•

HwDetect/ version 

•

Domain 

•

sequence number 

•

ptp time 

•

epoch (from 1588) 

•

flags 

•

Data 

See 

Table 10-7

 for detailed descriptions.

Command interface triggering

A command interface trigger occurs when:

•

A GPIB GET command is detected (GPIB only).

•

A VXI-11 

device_trigger

 method is invoked (VXI-11 only).

•

A 

*TRG

 message is received.

Use 

trigger.EVENT_ID

 to monitor for command interface triggers. To ensure that commands 

and triggers issued over the command interface are processed in the correct order, a trigger event 
is not generated until:

•

The trigger command is executed.

•

trigger.wait()

 retrieves the trigger command from the input queue before it would 

normally be executed.

Command interface triggering does not generate action overruns. The triggers are processed in 
the order that they are received in the Series 2600A input queue. The Series 2600A does not 
process incoming commands while a script is running. Input triggers that are not processed can 
cause an overflow in the input queue. It is important to make sure a script processes triggers while 
it is running. 

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов