Keithley 2600a series Скачать руководство пользователя страница 361

Страница: 361 / 696

2600AS-901-01 Rev. B / September 2008

Return to

Section Topics

19-39

Series 2600A System SourceMeter® Instruments Reference Manual

Section 19: Remote Commands

Example

Reads the indicators that are turned on:

annun = display.getannunciators()

print(annun)

Output:

1.03

For the returned value of 1280, the binary equivalent is 0000010100000000. Bits 9 and 11 are set.
Using the above chart in “

Remarks

”, the

REM

and

EDIT

indicators are turned on.

display.getcursor

Function

Reads the present position of the cursor for the user display.

TSP-Link
accessibility

This function can be accessed from a remote TSP-Link node.

Usage

row, column, style = display.getcursor()

row

Returns the row for the present cursor position.

column

Returns the column for the present cursor position.

style

Returns the cursor style.

Remarks

• This function switches the display to the user screen, and then returns values to indicate row and

column position, and cursor style.

• The

row

value is returned as 1 (top row) or 2 (bottom row).

• With the cursor in the top row, the

column

is returned as a value from 1 to 20. With the cursor in

the bottom row, the

column

is returned as a value from 1 to 32. Columns are numbered from left

to right on the display.

• The returned value for style is 0 (invisible) or 1 (blink).

Details

See

Also see

Example

Reads cursor position (row and column):

row, column = display.getcursor()

print(row, column)

Output:

1.00 3.00

The above output indicates that the cursor is in Row 1 at Column 3.

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2600a series

Отзывы:

Keithley 2600a series, Справочное руководство, Страница: 361 / 696

Результаты поиска

Содержание 2600a series

Отзывы: