Keithley 2600a series Скачать руководство пользователя страница 533

Страница: 533 / 696

2600AS-901-01 Rev. B / September 2008

Return to

Section Topics

19-211

Series 2600A System SourceMeter® Instruments Reference Manual

Section 19: Remote Commands

trigger.wait

Function

Wait for a command interface trigger event.

TSP-Link
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

triggered = trigger.wait(timeout)

timeout

Maximum amount of time in seconds to wait for the trigger.

triggered

Returns

true

if a trigger was detected. Returns

false

if no triggers were detected during the timeout period.

Remarks

• This function will wait up to

timeout

seconds for a trigger on the active command interface. A

command interface trigger occurs when:
•

A GPIB GET command is detected (GPIB only).

•

A VXI-11

device_trigger

method is invoked (VXI-11 only).

•

*trg

message is received.

• If one or more of these trigger events were previously detected, this function will return

immediately.

• After waiting for a trigger with this function, the event detector will be automatically reset and

rearmed. This is true regardless of the number of events detected.

Details

See

Section 8

Also see

trigger.clear

Example

Waits up to 10 seconds for a trigger:

triggered = trigger.wait(10)

print(triggered)

Output:

false

The above output indicates that no trigger was detected during the 10 second timeout.

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2600a series

Отзывы:

Keithley 2600a series, Справочное руководство, Страница: 533 / 696

Результаты поиска

Содержание 2600a series

Отзывы: