KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Руководство по установке

Страница: 40 / 168

5 Installing the unit
32
4. Remove the plastic wrap.
5. Remove the accessory boxes and the main support
cover.
6. Fold down the bottom end of the box and slide the unit
over the edge of the pallet.
7. Attach the wall bracket(s) to wall. The upper bracket is
mandatory. The lower bracket is optional.
• Drill holes according to figure below.
• Position the wall bracket in the middle of (lateral and
lengthwise) the holes in the bracket.
NOTICE! The unit is normally installed with one wall
bracket (upper) and one base plate, which is bolted to
the floor. If the unit cannot be bolted to the floor, an ad-
ditional wall bracket (lower) or exhibition stand
Adjustments:
1) angle
2) depth
3) lateral
4) vertical
Additional wall bracket (lower)