Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Скачать руководство пользователя страница 162

Страница: 162 / 246

STRM Users Guide

156

SING

THE

LOW

IEWER

Step 3

Double-click the flow you wish to view in greater detail.
The flow details window appears.

Total Bytes

Specifies the total number of bytes associated with the flow.

Source Packets

Specifies the total number of packets from the source.

Destination

Packets

Specifies the total number of packets from the destination.

Total Packets

Specifies the total number of packets associated with the flow.

Protocol

Specifies the protocol associated with the flow.

Application

Specifies the application that has generated the flow.

ICMP Type

Specifies the ICMP type, if applicable.

Source Flags

Specifies the TCP flags detected in the source packet, if

applicable.

Destination Flags

Specifies the TCP flags detected in the destination packet, if

applicable.

Source QOS

Quality of Service (QoS) enables a network to provide various

levels of service for flows. QoS provides the following basic levels

of service:

•

Best Effort

- This level of service does not guarantee delivery.

The delivery of the flow is considered best effort.

•

Differentiated Service

- Certain flows are granted priority

over other flows. This priority is granted by classification of

traffic.

•

Guaranteed Service

- This level of service guarantees the

reservation of network resources for certain flows.

This parameter provides the QoS level of service for the source

flow.

Destination QOS

This parameter provides the QoS level of service for the

destination flow.

Flow Source

Specifies the system that detected the flow.

Flow Interface

Specifies the interface that received the flow.

Source If Index

Specifies the source ifIndex number.

Destination If

Index

Specifies the destination ifIndex number.

Source ASN

Specifies the source ASN value.

Destination ASN

Specifies the destination ASN value.

Table 7-2

Flow Viewer Parameters (continued)

Parameter

Description

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1























































































































































































































































Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1, Руководство пользователя

Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды