Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Скачать руководство пользователя страница 168

Страница: 168 / 246

STRM Users Guide

162

SING

THE

LOW

IEWER

If you select

Source Port, Destination Port

Application

Protocol

Flow

Direction

ICMP type

Source Network/ Destination Network/ Protocol

Source IP to Destination IP

Source ASN/ Destination ASN

Destination

Port/ Protocol

Destination Port/ Application

Application/ Source IF Index/

Destination IF Index

Destination Port/ Source IF Index/ Destination IF

Index

Source IP/ Destination IP

Source ASN/ Destination ASN

Flow

Sources

Flow Source/ Interface

Source Network/ Destination Network/

Destination Port/ Protocol

, or

Source IF Index/ Destination IF Index

Note:

The column layout of the data depends on the chosen aggregate option.

Destination Port

Specifies the destination port of the flow. If there are multiple

destination ports associated with this event, this field indicates

Multiple and the number.

Destination

Network

Specifies the destination network of the flow. If there are multiple

destination networks associated with this event, this field

indicates Multiple and the number.

Application

Specifies the application that generated the flows. If there are

multiple applications associated with this event, this field

indicates Multiple and the number.

Bytes In

Specifies the number of bytes sent to the IP address.

Bytes Out

Specifies the number of bytes sent from the IP address.

Total Bytes

Specifies the total number of bytes associated with this IP

address.

Packets In

Specifies the number of packets sent to the IP address.

Packets Out

Specifies the number of packets sent from the IP address.

Total Packets

Specifies the total number of packets associated with this IP

address.

Host Count

Specifies the number of hosts the IP address has communicated

with.

Count

Specifies the number of flows the IP address has sent or

received.

Table 7-7

Application

Parameter

Description

Current Filters

The top of the table displays the details of the filter applied to the

search results. To clear these filter values, click

Clear Filter.

Graphs

Displays a bar chart representing the top 10 aggregates,

depending on the chosen aggregate option. Click

Hide Chart

you wish to remove the graph from your display.

Legend Reference A colored box in this field associated this flows to the graph.
Application

Specifies the application that generated the flows.

Table 7-6

Aggregate Parameters (continued)

Parameter

Description

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1























































































































































































































































Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1, Руководство пользователя

Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды