Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Скачать руководство пользователя страница 181

Страница: 181 / 246

STRM Users Guide

Adding an Asset Profile

175

Step 9

Click

Save Changes.

Adding an Asset

Profile

To add an asset profile:

Note:

Since STRM automatically learns and adds asset profiles, adding an asset

profile is typically not necessary.

Step 1

Click the

Assets

tab.

The Assets window appears.

Step 2

In the navigation menu, click

Asset Profiles

The Assets panel appears.

Step 3

Click

Add Asset

The Add Asset Profile window appears.

Step 4

Enter values for the parameters:

Machine Name

Specifies the machine name of this asset. If unknown, this

field is blank.

User

Specifies the user for this asset. If unknown, this field is

blank.

User Group

Specifies the user group for this asset. If unknown, this

field is blank.

Extra Data

Specifies any extra information for this asset. If the text for

this field is greater than 50 characters, click the text to view

the full text in a separate window.

Last Observed

Specifies the last time data was recorded for this asset.

Table 8-5

History Information (continued)

Parameter

Description

Table 8-6

Add Asset Profile Parameters

Parameter

Description

Specify the IP address or CIDR range of the asset.

Name

Specify the name of the asset. This parameter is case

sensitive.

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1























































































































































































































































Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1, Руководство пользователя

Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды