Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Скачать руководство пользователя страница 183

Страница: 183 / 246

STRM Users Guide

Editing an Asset

177

Step 6

To view port information, click

Ports

Step 7

To view History information, click

History

Operating System

Specifies the operating system running on the asset.

Host Name (DNS Name) Specifies the IP address or DNS name of the asset.
Asset Weight

Specify the asset weight of the asset.

VA Risk Level

Specifies the vulnerability assessment risk level (0 to 10)

for the asset where 0 is the lowest and 10 is the highest.

This is a weighted value against all other hosts in your

deployment.

How Threatening

Specifies the threat level (0 to 10) posed by the asset

where 0 is the lowest and 10 is the highest. This is a

weighted value against all other hosts in your deployment.

How Threatened

Specifies the threat level (0 to 10) to the asset where 0 is

the lowest and 10 is the highest. This is a weighted value

against all other hosts in your deployment.

Table 8-7

Asset Profile Window (continued)

Parameter

Description

Table 8-8

Ports Information

Parameter

Description

Port

Specifies the port number for the services discovered

running on the asset.

OSVDB ID

Specifies the vulnerability identifier for the asset. Click the

ID to obtain more information.

Name

Specifies the name of the detected vulnerability. This value

is only available when integrating with VA tools.

Description

Specifies a description of the detected vulnerability. This

value is only available when integrating with VA tools.

Risk/Severity

Specifies the risk level (0 to 10) for the vulnerability.

Last Seen

Specifies the date and time that the service was last

detected running on the asset both either passively or

actively.

First Seen

Specifies the date and time when the service was first

detected running on the asset both either passively or

actively.

Table 8-9

History Information

Parameter

Description

MAC

Specifies the MAC address for this asset. If unknown, this

field is blank.

Host Name

Specifies the host name of this asset. If unknown, this field

is blank.

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1























































































































































































































































Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1, Руководство пользователя

Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды