Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Скачать руководство пользователя страница 126

Страница: 126 / 246

STRM Users Guide

120

NVESTIGATING

FFENSES

The List of Offenses appears.

The List of Offenses panel provides the following functions:

Table 5-33

List of Offenses

Parameter

Description

Flag

Specifies action taken on the offense, for example, if a flag

appears, the offense is marked for follow-up or if a user icon

appears, the offense has been assigned to a user. Point your

mouse over the icon to display additional information.

Specifies the STRM identifier for this offense.

Description

Specifies the description for this offense.

Attacker/Src

Specifies the IP address of the target associated with the offense.

Magnitude

Specifies the relative importance of this offense. The magnitude

bar provides a visual representation of all the correlated variables

of the network. Variables include credibility, relevance, and

severity. Point your mouse to the magnitude bar to values for the

offense and the calculated magnitude.

Target(s)/Dest

Specifies the IP address of the target associated with this

offense.

Attacker Net

Specifies the attacker network for this offense.

Target Net

Specifies the target network for this offense.

Events

Specifies the number of events associated with this offense.

Start Date

Specifies the first occurrence of this offense.

Last Event

Specifies the date of the last event.

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1























































































































































































































































Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1, Руководство пользователя

Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды