Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Скачать руководство пользователя страница 108

Страница: 108 / 246

STRM Users Guide

102

NVESTIGATING

FFENSES

The List of Offenses panel provides the following functions:

Table 5-13

List of Offenses

Parameter

Description

Flag

Specifies action taken on the offense, for example, if a flag

appears, the offense is marked for follow-up or if a user icon

appears, the offense has been assigned to a user. Point your

mouse over the icon to display additional information.

Specifies the STRM identifier for this offense.

Description

Specifies the description for this offense.

Attacker/Src

Specifies the IP address of the attacker associated with the

offense.

Magnitude

Specifies the relative importance of the offense. The magnitude

bar provides a visual representation of all the correlated variables

of the offense, attacker, target, or network. Variables includes

credibility, relevance, and severity. Point your mouse to the

magnitude bar to display values and the calculated magnitude.

Target(s)/Dest

Specifies the IP address of the target associated with this

offense. If DNS lookups is enabled in the STRM Administration

Console, you can view the DNS name by pointing your mouse

over the IP address or asset name. For more information, see the

STRM Administration Guide

Attacker Net

Specifies the attacker network that originated the event.

Target Net

Specifies the target network of this event.

Events

Specifies the number of events associated with this offense.

Start Date

Specifies the first occurrence of this offense.

Last Event

Specifies the date of the last event.

Table 5-14

Offense Panel Toolbar

Icon

Function

Allows you to view a list of attackers for this offense. For more

information, see

Managing Offenses By Attacker

Allows you to view all local or remote targets for this offense. For more

information, see

Managing Offenses By Targets

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1























































































































































































































































Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1, Руководство пользователя

Результаты поиска

Содержание SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Отзывы:

Похожие инструкции для SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Бренды по названию

Популярные бренды