Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 913 / 1502

ip nat outside source static
Syntax [ no ] ip nat outside source static globalIpAddress localIpAddress
[ no ] ip nat outside source static { tcp | udp } globalIpAddress globalPort localIpAddress
localPort
Release Information Command introduced before JunosE Release 7.1.0.
Description Translates the source address when routing a packet from the outside network to the
inside network, and “ untranslates” the destination address when a packet travels from
the inside network to the outside network. The
no version removes the static translation
and purges the associated translations from the translation table.
Options
•
tcp—Indicates a TCP port
•
udp—Indicates a UDP port
•
globalIpAddress —Inside global address
•
globalPort —Inside global TCP or UDP port
•
localIpAddress —Inside local address
•
localPort —Inside local TCP or UDP port
Mode Global Configuration
869 Copyright © 2010, Juniper Networks, Inc.
Chapter 10: I Commands