Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 262 / 1502

baseline bridge interface
Syntax baseline bridge interface interfaceType interfaceSpecifier
Release Information Command introduced before JunosE Release 7.1.0.
Description Sets a statistics baseline for a specified network interface belonging to a bridge group
or VPLS instance. The router implements the baseline by reading and storing the statistics
at the time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved. There is no
no version.
NOTE: Using the baseline bridge interface command for a VPLS instance affects the
specified network interface associated with the VPLS instance, but has no effect on
the VPLS virtual core interface, which represents all of the MPLS tunnels from the router
to the remote VPLS edge (VE) devices. To set a statistics baseline for the VPLS virtual
core interface, use the
baseline bridge interface vpls command.
Options interfaceType —One of the following interface types listed in Interface Types and
Specifiers on page 5
•
•
atm
•
fastEthernet
•
gigabitEthernet
•
tenGigabitEthernet
•
interfaceSpecifier— Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Mode Privileged Exec
Related Topics Setting a Baseline for VPLS Statistics in the JunosE BGP and MPLS Configuration Guide
•
Copyright © 2010, Juniper Networks, Inc. 218
JunosE 11.2.x Command Reference Guide A to M