Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 218 / 1502

atm mcpt-timers
Syntax atm mcpt-timers timer1 timer2 timer3
no atm mcpt-timers
Release Information Command introduced before JunosE Release 7.1.0.
Description Configures systemwide values for the three ATM Martini cell packing timers. These timers
define the time threshold that the router uses to collect and concatenate ATM cells in a
single VCC cell relay–encapsulated packet and transmit the packet on an MPLS
pseudowire connection. When the timer expires, the router forwards the packet even if
the number of concatenated ATM cells in the packet is fewer than the specified maximum
number of cells per packet. The
no version restores the default values for all three timers.
NOTE: See the atm cell-packing command for information about specifying the
maximum number of concatenated cells per packet and identifying which of the three
ATM Martini cell packing timers you want to use to detect timeout of the cell collection
threshold.
Options timer1 —Number of microseconds in the range 100–4095; default value is 100
•
•
timer2 —Number of microseconds in the range 100–4095; default value is 500
•
timer3 —Number of microseconds in the range 100–4095; default value is 1000
Mode Global Configuration
Related Topics Configuring an MPLS Pseudowire with VCC Cell Relay Encapsulation in the JunosE BGP
and MPLS Configuration Guide
•
Copyright © 2010, Juniper Networks, Inc. 174
JunosE 11.2.x Command Reference Guide A to M