Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 1412 / 1502

mpls ldp targeted-hello receive list
Syntax [ no ] mpls ldp targeted-hello receive list
{ access-list
accessListName | ipAddress [ ipAddress ]* }
Release Information Command introduced before JunosE Release 7.1.0.
Description Configures the list of peer addresses from which MPLS accepts targeted hello messages.
When you configurea receive list, hello messages are accepted only from list members.
If no list is configured, hello messages are accepted from all addresses. The
no version
removes the list of peer addresses.
NOTE: This command is unnecessary if you configure the mpls ldp targeted-hello send
list command.
Options accessListName —String of up to 32 alphanumeric characters that identifies an access
list
•
•
ipAddress —IP address of a peer
•
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Mode Global Configuration
Copyright © 2010, Juniper Networks, Inc. 1368
JunosE 11.2.x Command Reference Guide A to M