Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 653 / 1502

existence-test
Syntax existence-test { event eventOwner eventName |
startup { absent | present } | test-type { absent | changed | present } }
no existence-test [ event | startup | test-type ]
Release Information Command introduced before JunosE Release 7.1.0.
Description Defines existence test values for the trigger that you are configuring, including binding
an event to the existence-test trigger, specifying a startup condition, and defining an
existence-test type. The
no version deletes the existence-test values for this trigger or
removes either the startup condition or event binding.
Options
•
eventOwner —Name of event owner that partially specifies event to trigger the existence
test; string of up to 32 alphanumeric characters
•
eventName —Name of event that partially specifies event to trigger the existence test;
string of up to 32 alphanumeric characters
•
startup—Specifies startup existence condition that you predict the sample to follow;
absent or present; you can specify both conditions in the same command
•
test-type—Specifies type of existence test to perform; absent, changed, or present;
you can specify one, two, or all three conditions in the same command
Mode SNMP Trigger Configuration
609 Copyright © 2010, Juniper Networks, Inc.
Chapter 6: E Commands