Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 600 / 1502

enable password
Syntax enable password [ level securityLevel ] [ passwordType ] passwordText
no enable password [ level securityLevel ]
Release Information Command introduced before JunosE Release 7.1.0.
Description Sets a password to control access to certain types of commands. The no version removes
the password requirement.
NOTE: On the E Series router, all passwords are stored as encrypted passwords.
Options securityLevel —Security level for which you want to set the password; default value is
5; commands generally fall into one of the following security/privilege levels:
•
•
0—Allows the user to execute the help , enable , disable , and exit commands
•
1—Allows the user to execute commands in User Exec mode plus commands at level
0
•
5—Allows the user to execute Privileged Exec show commands plus the commands
at levels 1 and 0; this is the default level
•
10—Allows the user to execute all commands except support commands, which
may be provided by Juniper Networks Customer Service
•
15—Allows the user to execute privilege setting and support commands
•
passwordType :
•
0—Specifies that an unencrypted password follows; this is the default
•
7—Specifies that an encrypted password follows
•
passwordText— Password, either encrypted or unencrypted, depending on the password
type
Mode Global Configuration
Copyright © 2010, Juniper Networks, Inc. 556
JunosE 11.2.x Command Reference Guide A to M