Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 1146 / 1502

ipv6 route
Syntax ipv6 route [ vrf vrfName ] prefix { nextHop | interfaceType interfaceSpecifier }
[ distance ]
no ipv6 route [ vrf vrfName ] prefix [ nextHop | interfaceType interfaceSpecifier ]
[ distance ]
Release Information Command introduced before JunosE Release 7.1.0.
vrf keyword and vrfName variable added in JunosE Release 7.2.0.
Description Configures a static IPv6 prefix route. The no version removes a static IPv6 prefix route.
Options
•
vrfName —Name of the VRF; string of 1–32 alphanumeric characters
•
prefix —Combination of both a prefix and prefix length (mask) value. The prefix (IP
address or network) defines the IPv6 interface or network. The prefix (mask) length
of the IPv6 prefix is a decimal value that indicates how many of the high-order
contiguous bits of the address comprise the prefix (the network portion of the address).
A slash mark must precede the decimal value. An example of a prefix would be “
7fff::0/16” , “ 7fff::0/32” , “ 7fff:2:3::0/24” , or “ 7fff::1/128” .
•
nextHop —IPv6 address of the next-hop to reach the destination prefix (network). The
next-hop address need not be directly connected; recursion locates the physical
next-hop.
•
interfaceType —Interface type; see “Interface Types and Specifiers” on page 5
•
interfaceSpecifier— Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
•
distance —Preference value for the IPv6 route. A default value of 1 gives static routes
precedence over any other type of route (with the exception of connected routes).
Mode Global Configuration
Copyright © 2010, Juniper Networks, Inc. 1102
JunosE 11.2.x Command Reference Guide A to M