Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 1272 / 1502

local ip identity
Syntax local ip identity
{ address
ipAddress | range ipRangeLow ipRangeHigh | subnet netAddress netMask }
no local ip identity
Release Information Command introduced in JunosE Release 7.3.0.
Description Overrides the local identity (phase 2 identity) used for IPSec security association
negotiations. For IPSec negotiations to succeed, the local and peer identities at one end
of the tunnel must match the peer and local identities at the other end (respectively).
The
no version restores the default value, wildcard network value 0.0.0.0/0.
Options
•
ipAddress —IP address used as the local identity for IPSec security association
negotiations
•
ipRangeLow— Low end of a range used as the local identity for IPSec security association
negotiations
•
ipRangeHigh— High end of a range used as the local identity for IPSec security
association negotiations
•
netAddress— IP network address used as the local identity for IPSec security association
negotiations
•
netMask— IP network mask used as the local identity for IPSec security association
negotiations
Mode IPSec Tunnel Profile Configuration
Copyright © 2010, Juniper Networks, Inc. 1228
JunosE 11.2.x Command Reference Guide A to M