Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 356 / 1502

bridge address
Syntax bridge { bridgeGroupName | vplsName } address macAddress
{ forward interfaceType interfaceSpecifier | discard }
no bridge { bridgeGroupName | vplsName } address macAddress
Release Information Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Description Enables a bridge group or VPLS instance to filter (forward or discard) frames based on
their MAC address. Use this command to filter frames by a specific MAC address and to
add a static (nonlearned) entry to the forwarding table. The
no version removes the static
MAC address entry from the forwarding table.
NOTE: For a VPLS instance, you cannot create a static (nonlearned) MAC address entry
to forward to the VPLS virtual core interface.
Options
•
bridgeGroupName —Name of a bridge group specified with the bridge command
•
vplsName —Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
•
macAddress —Unique 48-bit (6-byte) number that is programmed into each LAN
network interface card (NIC) at the time of manufacture; also known as a hardware
address or physical address. The MAC address format is a dotted triple of four-digit
hexadecimal numbers; for example, 0090.1a40.4c7c
•
forward — Forwards frames destined for the specified MAC address out the specified
network interface
•
interfaceType —One of the following interface types listed in “Interface Types and
Specifiers” on page 5
•
atm
•
fastEthernet
•
gigabitEthernet
•
tenGigabitEthernet
•
interfaceSpecifier— Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
•
discard — Discards (drops) frames sent from or destined for the specified MAC address
without further processing
Mode Global Configuration
Copyright © 2010, Juniper Networks, Inc. 312
JunosE 11.2.x Command Reference Guide A to M