Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 551 / 1502

Options
•
bindingId —DHCP binding ID for a specific client
•
all—Specifies all DHCP local server, DHCP external server, and DHCP relay proxy client
bindings
•
all-local—Specifies all DHCP local server client bindings
•
all-external—Specifies all DHCP external server client bindings
•
all-relay-proxy—Specifies all DHCP relay proxy client bindings
•
local—Specifies DHCP local server client bindings that meet the deletion criteria
•
external—Specifies DHCP external server client bindings that meet the deletion criteria
•
relay-proxy—Specifies DHCP relay proxy client bindings that meet the deletion criteria
•
subnetAddress —IP address of the subnet on which the DHCP clients reside
•
ipPrefix —IP prefix (address and subnetwork mask) of the DHCP clients; for example,
10.10.10.0/24
•
no-interface—Specifies DHCP clients without a lower-layer interface; use this keyword
to delete DHCP client bindings configured over dynamic interfaces for which the
lower-layer interface has been shut down
•
string —Regular expression string that represents the interface, circuit ID, or remote ID
to be matched; you must enclose elements containing a space within double quotes
(“
one element ”)
Each element is either a literal string, a metacharacter, or a combination. You can
remove the special meaning of a metacharacter by preceding it with a backslash (\).
Regular expressions support the following metacharacters:
•
^ Matches the beginning of the input string. Alternatively, when used as the first
character within brackets—[^ ]—matches any number except the ones specified
within the brackets.
•
$ Matches the end of the input string
•
. (period) Matches any single character, including white space
•
* Matches 0 or more sequences of the immediately previous character or pattern.
•
+ Matches 1 or more sequences of the immediately previous character or pattern
•
? Matches 0 or 1 sequence of the immediately previous character or pattern
•
( ) Specifies patterns for multiple use when followed by one of the multiplier
metacharacters: asterisk *, plus sign +, or question mark ?
•
[ ] Matches any enclosed character; specifies a range of single characters
•
– (hyphen) Used within brackets to specify a range of AS or community numbers
507 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: D Commands