Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 896 / 1502

ip mobile secure foreign-agent
Syntax ip mobile secure foreign-agent ipAddress spi spi key { hex hexKeyVal | ascii asciiKeyVal }
[ replay timestamp within seconds ] [ algorithm { hmac-md5 | keyed-md5 } ]
no ip mobile secure foreign-agent ipAddress spi spi key { hex hexKeyVal |
ascii asciiKeyVal }
Release Information Command introduced in JunosE Release 9.0.0.
Description Configures the security associations for a foreign agent by specifying a security parameter
index (SPI) value and an authentication key. You can specify the interval within which a
registration request can exceed the home agent configured time value by specifying the
replay timestamp within keyword. The no version deletes the security associations for
the specified foreign agent on the virtual router.
Options
•
ipAddress —IP address of the foreign agent
•
spi —Security parameter index (SPI) value, a specific 4-octet hexadecimal number, in
the range 0x100–0xFFFFFFFF, that authenticates inbound requests and permits
authentication for outbound registration requests
•
hexKeyVal —128-bit hexadecimal number, in the range 0x0–0xFFFFFFFE, that specifies
the authentication key for a specific security association
•
asciiKeyVal —128-bit alphanumeric value, up to a maximum of 16 characters, that
specifies the authentication key for a specific security association
•
seconds —Number of seconds, in the range 1–255, by which a registration request can
exceed the home agent configured time value; default value is 7 seconds
•
hmac-md5—Specifies the authentication algorithm for Mobile IP messages, default
value is hmac-md5
•
keyed-md5—Specifies the authentication algorithm for Mobile IP messages
Mode Global Configuration
Copyright © 2010, Juniper Networks, Inc. 852
JunosE 11.2.x Command Reference Guide A to M