Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 397 / 1502

classifier-group
Syntax classifier-group { * | classifierName } [ precedence precValue ] [ parent-group
parentGroupName ] [ external parent-group externalParentGroupName
parameter parameterName ]
no classifier-group { * | classifierName ]
Release Information Command introduced before JunosE Release 7.1.0.
parent-group keyword and parentGroupName variable added in JunosE Release 7.2.0.
external parent-group keyword and externalParentGroupName variable added in JunosE
Release 8.0.0.
Description Creates a classifier group for a policy list and assigns precedence to the specific CLACL
in the group. This command accesses Classifier Group Configuration mode, in which you
create policy rule configurations related to the specified CLACL. If a parent group was
not created by the
parent-group command, the parent-group keyword creates a parent
group in a rate-limit hierarchy for IP, IPv6, L2TP, and MPLS. All packets matching the
classifier are sent to the parent group for further processing, except for packets dropped
by the classifier using the filter rule. More than one classifier group can have the same
parent group, which enables you to create hierarchies. The
no version removes the
classifier group and its rules from the policy list.
Options
•
*— Specifies that the router selects all packets from the interface associated with the
policy list for this classifier group
•
classifierName —Name of a specific CLACL used to classify packets in this policy list
•
precValue —Precedence value for the CLACL, in the range 0–65535; a value of 100 is
assigned if no value is specified
•
parentGroupName —Name of the parent group; if the parent group does not exist,
naming the parent group creates an empty parent group
NOTE: Secure policy lists, which are used for packet mirroring operations, do not support
named classifier groups. You must use classifier-group * . Also, secure policy lists do
not support the precedence keyword.
•
externalParentGroupName —External parent group name
•
parameterName —Parameter name
Mode Policy List Configuration
Related Topics Creating a Classifier Group for a Policy List
•
•
Configuring CLI-Based Mirroring
353 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: C Commands