Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 360 / 1502

bridge-group
Syntax bridge-group { bridgeGroupName | vplsName }
[ subscriber-trunk | snmp-trap link-status | learn addressCount ]
no bridge-group { bridgeGroupName | vplsName } [ subscriber-trunk | snmp-trap
link-status | learn ]
Release Information Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Description Assigns a network interface to a bridge group or VPLS instance. You can also use this
command to configure the type of interface, enable SNMP link-status processing for the
interface, and set the maximum number of dynamic MAC addresses that the interface
can learn. The
no version removes the network interface from the bridge group or VPLS
instance and restores the default values for the interface type (subscriber client interface),
SNMP link-status processing (disabled), or number of maximum learned MAC addresses
(0 addresses).
Options
•
bridgeGroupName —Name of the bridge group to which the interface belongs, as
specified with the bridge command
•
vplsName —Name of the VPLS instance to which the interface belongs, as specified
with the bridge vpls transport-virtual-router command
•
subscriber-trunk—Creates a trunk (server) interface in the bridge group or VPLS
instance; if you omit this keyword, the router creates a subscriber (client) interface by
default
•
snmp-trap link-status—Enables SNMP link-status processing only for the specified
interface in the bridge group or VPLS instance
•
addressCount —Maximum number of MAC addresses that the interface in the bridge
group or VPLS instance can learn, up to the maximum number that the router supports,
in the range 0–64000
Mode Interface Configuration, Subinterface Configuration
Related Topics Configuring VPLS Network Interfaces in the JunosE BGP and MPLS Configuration Guide
•
Copyright © 2010, Juniper Networks, Inc. 316
JunosE 11.2.x Command Reference Guide A to M