Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 493 / 1502

conformed-action
Syntax For IP and IPv6 rate-limit profiles:
[ no ] conformed-action { drop | transmit | mark markVal }
For L2TP rate-limit profiles:
[ no ] conformed-action { drop | transmit }
For MPLS rate-limit profiles:
[ no ] conformed-action { drop | transmit | mark-exp expValue }
For hierarchical rate-limit profiles:
[ no ] conformed-action { drop | transmit [ conditional | unconditional | final ] }
Release Information Command introduced before JunosE Release 7.1.0.
Description Sets the action for packets not conforming to the committed rate and committed burst
size, but conforming to the peak rate and peak burst size for a rate-limit profile. The
no
version restores the value to the default value, drop.
Options
•
drop—Drops the packet
•
transmit—Transmits the packet; for hierarchical rate limits:
•
conditional—Packets must pass the next rate limit
•
unconditional—Packets take resources, but are not affected by the rest of the
hierarchy
•
final—Packets exit the hierarchy at rate limit
•
markVal —Value in the range 0–255
•
expValue —EXP bit value in the range 0–7
Mode Rate Limit Profile Configuration
Related Topics Creating a Two-Rate Rate-Limit Profile
•
449 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: C Commands