Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010, Справочник по командам

Страница: 381 / 1502

bulkstats schema subtree
Syntax bulkstats schema schemaIndex subtree
{ if-stack | if-stats { subtreelist [ ifstatsList [ ifstatsList ]* ] |
if-create-delete-time-stats interfaceType interfaceType } | igmp | system }
bulkstats schema schemaIndex subtree
{ if-stack | if-stats | igmp [ subtreelist igmpList [ igmpList ]* ] | system }
no bulkstats schema schemaIndex
Release Information Command introduced before JunosE Release 7.1.0.
mplsL2shim , mplsMajor , and mplsMinor keywords added in JunosE Release 8.2.0.
Description Configures the schema for collecting if-stack, if-stats, or router data. The no version
removes the schema.
Options
•
schemaIndex— Identifier for the schema in the range 1–65535
•
if-stack—Retrieves ifStackTable
•
if-stats—Retrieves ifTable/ifXTable counters
•
ifstatsList —Type of statistics and time-offset keyword, which includes the offset from
the master interval at which the record was collected in each bulkstats interface record
•
if-create-delete-time-stats—Retrieves interface final statistics (interface statistics
that may be lost during higher create or delete frequency)
•
interfaceType —One of the following interface types for which you can collect statistics:
ATM 1483, IP, MPLS minor, MPLS major, MPLS shim, PPP
•
igmp—Retrieves IGMP statistics
•
igmpList —Type of statistics and time-offset keyword, which includes the offset from
the master interval at which the record was collected in each bulkstats interface record
•
system—Retrieves sysUpTime and nvsUtilPct global statistics; retrieves slotDescr, the
cpuUtilPct, and memUtilPct per-slot statistics
•
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Mode Global Configuration
337 Copyright © 2010, Juniper Networks, Inc.
Chapter 3: B Commands