John Bean B 200, Руководство оператора

Страница: 48 / 128

48
5-14
1 2
5-13
5-15
1
Operation
5.6.2 Manual Mode
5.6.2.1 Width Manual Entry
Rim width is entered via the menu keys, the rim
diameter can be determined manually .
If rim width is not given on the rim, it can be measured
on standard rims using the optional rim width callipers
(
Fig. 5-13
– Ref. no. EAA0247G21A).
—
Access the ENTERING RIM DATA ( Fig. 5-14 )
screen and select the Menu key F4
—
Read the nominal diameter on the rim or tyre and
note it down.
—
Press the menu key < or > ( 1, 2, Fig. 5-14 ) until the
required value is reached.
—
Press the menu key F4 or OK to set the value.
Note : Rim width is displayed in 0.10” steps.
5.6.2.2 Distance Manual Entry
Position the gauge arm correctly ( 1, Fig. 5-15 ).
—
Access the ENTERING RIM DATA screen and
select the Menu key F3 ( Fig. 5-14 ).
•
Read the arm extraction value on the gauged
column.
•
Enter the value read previously using the appropriate
keys
< or > ( 1, 2, Fig. 5-14 )
.
5.6.2.3 Diameter Manual Entry
•
Read the nominal rim diameter directly on the rim
or tyre itself.
•
Select the diameter F5 key on the control panel.
•
Enter the value read previously using the appropriate
keys
<
or
>
(
1, 2, Fig. 5-14
) .
•
Select another measurement to edit (if necessary)
or spin the wheel
.
..