John Bean B 200, Руководство оператора

Страница: 124 / 128

124
M4x10 (4x)
iii-4
iii-5
1
2
Installation Instructions
Fitting and connecting the monitor
Fig. iii-4 Fitting the monitor
The 4 screws needed (M4x10) to fi x the VESA support
to the monitor are part of the kit supplied.
Fig. iii-5 Connection of monitor and PC
Caution
Before connecting the electronic cables turn off the
mains switch.
•
Insert the monitor connector into the right-hand
socket (
item 1
) of the embedded unit.
•
Insert the monitor main connector into the socket
( item 2 ).
iv Test procedures
•
Balance a wheel to less than 0.25 oz. (5 grams) per
plane.
•
Perform a User Calibration. See Chapter 6.3.1.
v Instructing the operator
(Following applies only if a unit is installed by a service
Technician)
•
Show and explain the Safety Booklet.
•
Show the operator how to switch the unit on and
off.
•
Show the operator how to perform an emergency
stop.
•
Show the operator how to select a wheel type, enter
data and apply a weight.
..