John Bean B 200, Руководство оператора

Страница: 32 / 128

32
4-15
4-18
4-19
5
6
1
2 4 3 7 8
Layout
4.7 Help information
Help information explains the current action and, in
the case of an error code, provides hints for remedy.
Display help information
—
Press the HELP key (
3
,
Fig. 4-15
).
The fi rst screen with help information appears, e. g. to
the screen RIM DATA INPUT ( Fig. 4-18 ).
—
Press the HELP key once more to display the next
screen with help information.
(if present)
The second screen with help information to the screen
RIM DATA INPUT ( Fig. 4-19 ) appears.
Note
On pressing the HELP key in the last screen with help
information the display jumps to the fi rst screen again.
Quit help information
—
Press the ESC key ( 2, Fig. 4-15 ).
4.8 Immediate stop
Refer to Figure 4-15.
To perform an immediate stop:
•
Select the STOP ( 5 ) key to apply the electronic
brake.
In the event of an emergency stop due to an unexpected
action by the unit, rethink the steps that were made:
Did the operator make an error or omit to do
something?
Correct the input and continue working. No special
procedure is required.
Did the unit do something unexpected?
•
Read the relevant chapters again.
•
Prepare the unit for a restart:
switch off the unit
switch on the unit again.
•
Carefully repeat the commands with the manual
available.
•
If the unit does not function correctly,
WARNING: PREVENT ANY FURTHER USE OF THE
UNIT.
•
Call the service team immediately.
..