IVEK DIGISPENSE 3009 Скачать руководство пользователя страница 84

Страница: 84 / 109

DIGISPENSE 3009 CONTROLLER MODULE, STYLE B

Page 3-84

29 October, 2019

IVEK Corp. P03R017E

I/O Test Screen Description

- The I/O Test screen is used for trouble shooting the inputs and outputs of the

Controller Module.

Each input and output can be exercised to verify functionality. The current permission level

determines which push-buttons are available as shown.

The Start and Stop push-buttons are not functional with this screen. The screen will not affect the inputs and outputs

while an operation is in progress. Therefore, any operations in progress must be stopped before testing the inputs and

outputs.

Input 1, Input 2, Input 3, Input 4, Input CC 1, Input CC 2, Recipe STB -

The status of the input signals are

displayed here. The status will be

either FALSE if no external signal is applied or TRUE if a signal is applied.

Recipe In -

The Recipe In signal displays an integer representation of the Recipe In bits.

Output 1, Output 2, Output 3, Output 4, Aux Out 1, Aux Out 2, Recipe STB -

The status of the output signals are

displayed and changed here. A status of TRUE sets the output to the conduction level as configured on the Setup E
screen.

Recipe Out -

The Recipe Out signal allows the user to change the recipe output signals. An integer value determines

which bits are conducting or not conducting. When the recipe is 0 all bits are FALSE. When the recipe is 31 all bits are
TRUE. The conduction level for TRUE is configured on the Setup E screen.

RS232 -

The RS232 In displays data being received through the interface, "<no input>" appears and scrolls off as

characters

are received. The text "232 test" flashes on the screen at RS232 Out as the text is sent through the

interface.

RS485 -

The RS485 In displays data being received through the interface, "<no input>" appears and scrolls off as

characters

are received. The text "485 test" flashes on the screen at RS485 Out as the text is sent through the

interface.

To change a value;

1. Press the Arrow push-buttons to highlight the parameter.

2. Press the Enter push-button to bring up the Select New Value screen.

3. Press the Arrow push-buttons to select the desired value.

4. Press the Enter push-button.

Содержание DIGISPENSE 3009














































































































Результаты поиска

Содержание DIGISPENSE 3009

Отзывы:

IVEK DIGISPENSE 3009, Руководство пользователя, Страница: 84 / 109

Результаты поиска

Содержание DIGISPENSE 3009

Отзывы: