DIGISPENSE 3009 CONTROLLER MODULE, STYLE B
Page 3-5
29 October, 2019
IVEK Corp. P03R017E
3.1.2.3 MOTOR Connector (Figure 3.2 Item 3)
The Motor connector is used for making the electrical connections to the Motor
CAUTION
Never connect or disconnect the cable from this connector while power is on. Damage to the equipment
may result.
3.1.2.4 AUX1 AUX2 Connector (Figure 3.2 Item 4)
The AUX1 AUX2 Connector provides two outputs for triggering a variety of functions. Refer to section 3.3.9.2 for
additional information.
3.1.2.5 CC TRIGGERS Connector (Figure 3.2 Item 5)
The CC TRIGGERS (Contact Closure) connector provides two inputs (labeled 1 and 2) and a common for triggering a
variety of functions. Refer to section 3.3.9.1 for additional information.
3.1.2.6 USB Connector (Figure 3.2 Item 6)
The USB Connector provides an interface to control a variety of functions. The connector is a type-B device
connector. Refer to section 3.3.9.4 for additional information.
3.1.2.7 RS232 Connector (Figure 3.2 Item 7)
The RS232 interface provides control of all available functions and provides point-to-point communication. The
hardware is configured as Data Communications Equipment (DCE) standard. Refer to section 3.3.9.4 for additional
information.
1
2
3
4
5
6
7
8
9
Figure 3.2 Digispense 3009 Controller Module Rear Panel