IVEK DIGISPENSE 3009 Скачать руководство пользователя страница 42

Страница: 42 / 109

DIGISPENSE 3009 CONTROLLER MODULE, STYLE B

Page 3-42

29 October, 2019

IVEK Corp. P03R017E

Prime Screen Description

- The Prime screen displays the current Priming parameters and allows a user with

Supervisor

permission to change the parameters. The current permission level determines which push-buttons are

available as shown.

Status -

The status indicates the operational state of the system. Refer to section 3.2.8 for an explanation of each

status

type.

Volume Primed -

The Volume Primed is the total number of revolutions of the motor during the current/last prime

operation.

The total strokes counter will go up to a maximum of 60,000.

Recipe -

The Recipe line shows the current recipe selected in the Recipe screen. "0" indicates values changed since

last

"Get Recipe".

Prime Direction -

The Prime Direction is the direction of liquid flow through the Pump Module in Prime mode. The

direction

is either Forward or Reverse. To change the direction either refer to "To change a value" or press the

Change Direction push-button.

Prime Volume -

The Prime Volume is the number of strokes (revolutions) the motor will turn during a Prime

operation. The

range is 1 to 60,000 with an increment value of 1.

Priming Rate -

The Priming Rate is the speed of the motor in revolutions per minute (RPM) during a Prime operation.

The

range is 1 RPM to 1,500 RPM with an increment value of 1.

To change a value;

1. Press the Arrow push-buttons to highlight the parameter.

2. Press the Enter push-button to bring up either the Select New Value or Enter New Value screen.

3. In the Select New Value screen use the up and down arrow push-buttons to select the value. In the Enter New

Value screen press the Minimum or Maximum push-buttons to select the desired value or use the left and right
arrow push-buttons to select the digit and the up and down arrow push-buttons to change the digit's value.

4. Press the Enter push-button.

NOTE

Changing Prime Volume, Prime Rate or Prime Direction does not affect the settings of Dispense and Meter
mode. However, they do affect Agitate mode.

Содержание DIGISPENSE 3009














































































































Результаты поиска

Содержание DIGISPENSE 3009

Отзывы:

IVEK DIGISPENSE 3009, Руководство пользователя, Страница: 42 / 109

Результаты поиска

Содержание DIGISPENSE 3009

Отзывы: