SECTION 1—GENERAL GUIDELINES
16
Sip n’ Puff (Pneumatic) Controls
WARNING!
Risk of Injury or Damage
Improper mounting or maintenance of the Sip n’ Puff control including the mouthpiece and
breath tube may cause injury or damage.
Water inside the Sip n’ Puff interface module may cause damage to the unit.
Excessive saliva residue in the mouthpiece/straw can reduce performance.
Blockages, a clogged saliva trap or air leaks in the system may cause Sip N’ Puff not to function
properly.
– Ensure moving parts of the wheelchair, including the operation of powered seating, DO NOT
pinch or damage the Sip n’ Puff tubing.
– Saliva trap MUST be installed to reduce risk of water or saliva entering the Sip n’ Puff interface
module.
– Occasionally flush the mouthpiece to remove saliva residue.
– The mouthpiece/straw MUST be completely dry before installation.
– If Sip n’ Puff does not function properly, inspect system for blockages, clogged saliva trap or air
leaks.
– As necessary, replace mouthpiece, breath tube and saliva trap.
NOTE: Contact your Invacare dealer/provider for more information about maintaining and troubleshooting the Sip n’ Puff system.
Operating Information
WARNING
Risk of Minor to Serious Injury
Pinch points can cause minor to serious injury.
Be mindful of potential pinch points and use caution when using this product.
