Intel Celeron Dual-Core E1000 Series Скачать руководство пользователя страница 64

Страница: 64 / 148

ATX Thermal/Mechanical Design Information

Thermal and Mechanical Design Guidelines

6.5

Safety Requirements

Heatsink and attachment assemblies shall be consistent with the manufacture of units

that meet the safety standards:

•

UL Recognition-approved for flammability at the system level. All mechanical and

thermal enabling components must be a minimum UL94V-2 approved.

•

CSA Certification. All mechanical and thermal enabling components must have

CSA certification.

•

All components (in particular the heatsink fins) must meet the test requirements

of UL1439 for sharp edges.

•

If the International Accessibility Probe specified in IEC 950 can access the moving

parts of the fan, consider adding safety feature so that there is no risk of personal

injury.

6.6

Geometric Envelope for Intel Reference ATX
Thermal Mechanical Design

Appendix H gives detailed reference

ATX/

ATX motherboard keep-out information for the reference thermal/mechanical

enabling design. These drawings include height restrictions in the enabling component

region.

The maximum height of the reference solution above the motherboard is 71.12 mm

[2.8 inches], and is compliant with the motherboard primary side height constraints

defined in the ATX Specification revision 2.1 and the microATX Motherboard Interface

Specification revision 1.1 found at

http://www.formfactors.org

. The reference solution

requires a chassis obstruction height of at least 81.28 mm [3.2 inches], measured
from the top of the motherboard (refer to Sections

3.3 and

6.2.4). This allows for

appropriate fan inlet airflow to ensure fan performance, and therefore overall cooling

solution performance. This is compliant with the recommendations found in both ATX

Specification V2.1 and microATX Motherboard Interface Specification V1.1 documents.

Содержание Celeron Dual-Core E1000 Series





















































































































































Результаты поиска

Содержание Celeron Dual-Core E1000 Series

Отзывы:

Похожие инструкции для Celeron Dual-Core E1000 Series

Бренды по названию

Популярные бренды

Intel Celeron Dual-Core E1000 Series, Руководство по дизайну

Результаты поиска

Содержание Celeron Dual-Core E1000 Series

Отзывы:

Похожие инструкции для Celeron Dual-Core E1000 Series

Бренды по названию

Популярные бренды