Intel Celeron Dual-Core E1000 Series Скачать руководство пользователя страница 41

Страница: 41 / 148

Balanced Technology Extended (BTX) Thermal/Mechanical Design Information

Thermal and Mechanical Design Guidelines

Balanced Technology Extended
(BTX) Thermal/Mechanical
Design Information

5.1

Overview of the Balanced Technology Extended
(BTX) Reference Design

The reference thermal module assembly is a Type II BTX compliant design and is

compliant with the reference BTX motherboard keep-out and height recommendations
defined Section

6.6.

The solution comes as an integrated assembly. An isometric view of the assembly is
provided Figure

5-4.

5.1.1

Target Heatsink Performance

Table

5-1 provides the target heatsink performance for the processor with the BTX

boundary conditions. The results will be evaluated using the test procedure described
in Section

5.2.

The table also includes a T

assumption of 35.5 °C for the Intel reference thermal

solution at the processor fan heatsink inlet discussed Section

3.3. The analysis

assumes a uniform external ambient temperature to the chassis of 35 °C across the

fan inlet, resulting in a temperature rise, T

, of 0.5 °C. Meeting T

and

targets can

maximize processor performance (refer to Sections

2.2,

2.4. and Chapter

4).

Minimizing T

, can lead to improved acoustics.

Содержание Celeron Dual-Core E1000 Series





















































































































































Результаты поиска

Содержание Celeron Dual-Core E1000 Series

Отзывы:

Похожие инструкции для Celeron Dual-Core E1000 Series

Бренды по названию

Популярные бренды

Intel Celeron Dual-Core E1000 Series, Руководство по дизайну

Результаты поиска

Содержание Celeron Dual-Core E1000 Series

Отзывы:

Похожие инструкции для Celeron Dual-Core E1000 Series

Бренды по названию

Популярные бренды