Intel Celeron Dual-Core E1000 Series Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 148

background image

Intel® Quiet System Technology (Intel® QST)

Thermal and Mechanical Design Guidelines

69

7

Intel

®

Quiet System

Technology (Intel

®

QST)

In the Intel

®

965 Express Family Chipset a new control algorithm for fan speed control

is being introduced. It is composed of an Intel

®

Management Engine (ME) in the

Graphics Memory Controller Hub (GMCH) which executes the Intel

®

Quiet System

Technology (Intel

®

QST) algorithm and the ICH8 containing the sensor bus and fan

control circuits.

The ME provides integrated fan speed control in lieu of the mechanisms available in a

SIO or a stand-alone ASIC. The Intel QST is time based as compared to the linear or

state control used by the current generation of FSC devices.

A short discussion of Intel QST will follow along with thermal solution design

recommendations. For a complete discussion of programming the Intel QST in the ME

please consult the Intel

®

Quiet System Technology (Intel

®

QST) Configuration and

Tuning Manual.

Note:

Fan speed control algorithms and Intel QST in particular rely on a thermal solution
being compliant to the processor thermal profile. It is unlikely that any fan speed
control algorithm can compensate for a non-compliant thermal solution. See Chapter

and Chapter

6 for thermal solution requirements that should be met before evaluating

or configuring a system with Intel QST.

7.1

Intel

®

QST Algorithm

The objective of Intel QST is to minimize the system acoustics by more closely

controlling the thermal sensors to the corresponding processor or chipset device

T

CONTROL

value. This is achieved by the use of a Proportional-Integral-Derivative (PID)

control algorithm and a Fan Output Weighting Matrix. The PID algorithm takes into

account the difference between the current temperature and the target (T

CONTROL

), the

rate of change and direction of change to minimize the required fan speed change.

The Fan Output Weighting Matrix uses the effects of each fan on a thermal sensor to

minimize the required fan speed changes

7-1 shows in a very simple manner how Intel QST works. See the Intel Quiet

System Technology (Intel

®

QST) Configuration and Tuning Manual for a detail

discussion of the inputs and response.

«
...
67
68
69
70
71
...
»

Содержание Celeron Dual-Core E1000 Series





















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Celeron Dual-Core E1000 Series

Бренд: Rane Страницы: 4

Бренд: Vonets Страницы: 8

Бренд: VMIC Страницы: 126

Armor 101 Series

Бренд: Lochinvar Страницы: 28

Armor 101 Series

Бренд: Lochinvar Страницы: 44

Бренд: Freescale Semiconductor Страницы: 921

Бренд: Cervoz Страницы: 22

Quadro M6000 Sync

Бренд: Nvidia Страницы: 8

SiliconDrive SSD-P16G(I)-3100

Бренд: Silicon Systems Страницы: 108

Бренд: Uniden Страницы: 5

Бренд: Lindy Страницы: 12

Бренд: IBM Страницы: 64

Бренд: Altimium Страницы: 12

Бренд: VANTAS Страницы: 30

Бренд: MSE Страницы: 35

Бренд: Pico Macom Страницы: 4

F2MC-16L Series

Бренд: Fujitsu Страницы: 68

BIS M-620-068-A01-00-S Series

Бренд: Balluff Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды