Intel Celeron Dual-Core E1000 Series Скачать руководство пользователя страница 12

Страница: 12 / 148

Introduction

Thermal and Mechanical Design Guidelines

1.1.3

Document Scope

This design guide supports the following processors:

•

Intel

Core

™

2 Duo processor with 4 MB cache at Tc-max of 60.1 °C applies to

Intel

Core

™

2 Duo processors E6700, E6600, E6420 and E6320

•

Intel

Core

™

2 Duo processor with 4 MB cache at Tc-max of 72.0 °C applies to

Intel

Core

™

2 Duo processors E6850, E6750, E6550 and E6540

•

Intel

Core

™

2 Duo processor with 2 MB cache of Tc-max of 72.0 °C applies to

Intel

Core

™

2 Duo processor E4700

•

Intel

Core

™

2 Duo processor with 2 MB cache at Tc-max of 61.4 °C applies to

Intel

Core

™

2 Duo processor E6000 series of processors E6400 and E6300 and

Intel

Core

™

2 Duo processor E4000 series of the processors E4400 and E4300

•

Intel

Pentium

Dual Core processor E2000 series at Tc-max of 61.4 °C applies to

the Intel

Pentium

Dual Core processors E2160 and E2140

•

Intel

Core

™

2 Duo processor with 2 MB cache at Tc-max of 73.3 °C applies to

Intel

Core

™

2 Duo processors E6400, E4600, E4500, E4400, and E4300

•

Intel

Pentium

Dual Core processor E2000 series at Tc-max of 73.3 °C applies to

the Intel

Pentium

Dual Core processors E2220, E2200, E2180, E2160, and

E2140

•

Intel

Celeron

dual-core processor E1000 Series of Tc-max of 73.3 °C applies to

the Intel

Celeron

dual-core processor E1200, E1400, and E1500

In this document when a reference is made to “the processor” it is intended that this

includes all the processors supported by this document. If needed for clarity, the

specific processor will be listed.

In this document, when a reference is made to the “the reference design” it is

intended that this includes all ATX reference designs (D60188-001 and E18764-001)

supported by this document. If needed for clarify, the specific reference design will be

listed.

In this document, when a reference is made to “the Datasheet”, the reader should

refer to the Intel

Core™2 Extreme Processor X6800 and Intel

Core™2 Duo Desktop

Processor E6000 and E4000 Sequences Datasheet, Intel

Pentium

Dual-Core

Desktop Processor E2000 Series Datasheet, or Intel

Celeron

Dual-Core Processor

E1000 Series Datasheet. If needed for clarity, the specific processor datasheet will be

referenced.

Chapter

2 of this document discusses package thermal mechanical requirements to

design a thermal solution for the processor in the context of personal computer
applications. Chapter

3 discusses the thermal solution considerations and metrology

recommendations to validate a processor thermal solution. Chapter

4 addresses the

benefits of the processor’s integrated thermal management logic for thermal design.
Chapter

5 gives information on the Intel reference thermal solution for the processor

in BTX platform. Chapter

6 gives information on the Intel reference thermal solution

for the processor in ATX platform. Chapter

7 discusses the implementation of acoustic

fan speed control.

The physical dimensions and thermal specifications of the processor that are used in

this document are for illustration only. Refer to the datasheet for the product

dimensions, thermal power dissipation and maximum case temperature. In case of

conflict, the data in the datasheet supersedes any data in this document.

Содержание Celeron Dual-Core E1000 Series





















































































































































Результаты поиска

Содержание Celeron Dual-Core E1000 Series

Отзывы:

Похожие инструкции для Celeron Dual-Core E1000 Series

Бренды по названию

Популярные бренды

Intel Celeron Dual-Core E1000 Series, Руководство по дизайну

Результаты поиска

Содержание Celeron Dual-Core E1000 Series

Отзывы:

Похожие инструкции для Celeron Dual-Core E1000 Series

Бренды по названию

Популярные бренды