Integra DTR-70.2, Инструкция по эксплуатации

Страница: 71 / 124

71
En
Screen Centered Dialog
“ Screen Ctr Dialog ” is a function for moving the Center
image of dialog etc. upwards through use of the front high
speaker to fix the image to the display height.
■
Screen Ctr Dialog
As the value increases, the Center image moves upwards.
`
0 :
Screen Centered Dialog off.
`
1 to 5 :
Screen Centered Dialog on.
Note
• The “ Screen Ctr Dialog ” can be used when supported listening
mode is selected and “ Center ” and “ Front High ” are set to
effective in “Speaker Configuration” (
➔
54
).
• This setting cannot be used while a pair of headphones is con-
nected.
Re-EQ
With the Re-EQ function, you can compensate a
soundtrack whose high-frequency content is too harsh,
making it more suitable for home theater viewing.
■
Re-EQ
`
Off :
Re-EQ Function off.
`
On :
Re-EQ Function on.
This function can be used with the following listening
modes: Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, Multichannel, DTS, DTS-HD High Reso-
lution Audio, DTS-HD Master Audio, DTS Express,
DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby
PLIIx Movie, Neo:6 Cinema and 5.1-channel
Neo:6, and Neural Surround.
■
Re-EQ(THX)
`
Off :
Re-EQ (THX) Function off.
`
On :
Re-EQ (THX) Function on.
This function can be used with the following listening
modes: THX Cinema, THX Surround EX, and
THX Ultra2 Cinema.
Note
• Settings for the Re-EQ function are kept in each listening mode.
However, in THX listening mode, when the AV receiver is
turned off, it will return to “
On ”.
• This setting cannot be used while a pair of headphones is con-
nected.
Audio Selector
You can set priorities of audio output when there are both
digital and analog inputs.
■
Audio Selector
`
ARC :
The audio signal from your TV tuner can be sent to
the
HDMI OUT MAIN of the AV receiver.
*1
With this selection the TV’s audio can be automati-
cally selected as a priority among other assignments.
`
HDMI :
This can be selected when HDMI IN has been
assigned as an input source. If both HDMI ( HDMI
IN ) and digital audio inputs ( COAXIAL IN or OPTI-
CAL IN ) have been assigned, HDMI input is auto-
matically selected as a priority.
`
COAX :
This can be selected when COAXIAL IN has been
assigned as an input source. If both coaxial and
HDMI inputs have been assigned, coaxial input is
automatically selected as a priority.
`
OPT :
This can be selected when
OPTICAL IN
has been
assigned as an input source. If both optical and
HDMI inputs have been assigned, optical input is
automatically selected as a priority.
`
Multich :
The AV receiver always outputs analog signals from
multichannel analog input.
`
Analog :
The AV receiver always outputs analog signals.
Note
• The setting is stored individually for each input selector.
• This setting can be made only for the input source that is
assigned as HDMI IN , COAXIAL IN , or OPTICAL IN .
• To select the digital audio input, see “Digital Audio Input” for
more detail (
➔
53 ).
• To select “ Multich ”, you must assign the multichannel input
(
➔
53 ).
*1 You can select “ ARC ” if you select the TV/CD input selector.
But you cannot select it if you’ve selected “ Off ” in the “ Audio
Return Channel ” setting (
➔
68 ).