Integra DTR-70.2, Инструкция по эксплуатации

Страница: 68 / 124

68
En
■
HDMI Control(RIHD)
`
Off :
p
disabled.
`
On :
p
enabled.
This function allows p -compatible components
connected via HDMI to be controlled with the AV receiver
(
➔
115 to 116 ).
Note
• When set to “ On ” and close the menu, the name of connected
p -compatible components and “ RIHD On ” are dis-
played on the AV receiver.
“
Search… ”
→
“ (name) ”
→
“ RIHD On ”
When the AV receiver cannot receive the name of the compo-
nent, it is displayed as “
Player *” or “ Recorder *”, etc (“*”
means the number of two or more component).
• When an
p
-compatible component is connected to the
AV receiver via the HDMI cable, the name of the connected
component is displayed on the AV receiver display. For example,
while you are watching TV broadcasting, if you operate a
Blu-ray Disc/DVD player (being powered on) by the remote
control of the AV receiver, the name of the Blu-ray Disc/DVD
player is displayed on the AV receiver.
• Set to “ Off ” when a connected piece of equipment is not com-
patible or it is unclear whether the equipment is compatible or
not.
• If movement is unnatural when set to
“
On
”, change the setting
to “ Off ”.
• Refer to the connected component’s instruction manual for
details.
• The p control does not support HDMI OUT SUB . Use
HDMI OUT MAIN
instead.
• When the source equipment is connected with the
u
connec-
tion, it may malfunction if “ HDMI Control(RIHD) ” is set to
“
On
”.
■
Audio Return Channel
`
Off :
Select “ Off ” if you don’t want to use audio return
channel (ARC) function.
`
Auto :
The audio signal from your TV tuner can be sent to
the
HDMI OUT MAIN of the AV receiver.
Audio return channel (ARC) function enables an HDMI
(Audio Return Channel) capable TV to send the audio
stream to the
HDMI OUT MAIN of the AV receiver. To
use this function, you must select the TV/CD input selec-
tor and your TV must support ARC function.
Note
• The “ Audio Return Channel ” setting can be set only when the
“ HDMI Control(RIHD) ” setting is set to “ On ”.
• This setting is set to “ Auto ” automatically when the “ HDMI
Control(RIHD) ” is set to “ On ” first time.
■
Power Control
`
Off :
Power Control disabled.
`
On :
Power Control enabled.
To link the power functions of p -compatible com-
ponents connected via HDMI, select “ On ”.
This setting is set to “ On ” automatically when the
“ HDMI Control(RIHD) ” is set to “ On ” first time.
Note
• The “ Power Control ” setting can be set only when the “ HDMI
Control(RIHD)
” setting is set to “
On ”.
• HDMI power control only works with
p
-compatible
components that support it and may not work properly with
some components due to their settings or compatibility.
• When set to “ On ”, power consumption will increase.
• When set to “ On ”, regardless of whether the AV receiver is On
or in Standby, both audio and video stream from an HDMI input
will be output to the TV or other components via HDMI connec-
tion (HDMI pass through function).
• The power consumption during standby mode will increase dur-
ing the HDMI pass through function; however if your TV sup-
ports CEC (Consumer Electronics Control), the power
consumption can be saved in the following cases:
– The TV is in standby mode.
– You are watching a TV program.
• Refer to the connected component’s instruction manual for
details.
■
TV Control
`
Off :
TV Control disabled.
`
On :
TV Control enabled.
Set to “ On ” when you want to control the AV receiver
from an
p
-compatible TV that is connected to
HDMI.
Note
• Do not assign the component connected with the HDMI input to
the TV/CD selector when you set “ TV Control ” setting to “ On ”.
Otherwise, appropriate CEC (Consumer Electronics Control)
operation is not guaranteed.
• Set to
“
Off
” when the TV is not compatible or when it is unclear
whether the TV is compatible or not.
• The “ TV Control ” setting can be set only when the “ HDMI
Control(RIHD) ” (
➔
68 ) and “ Power Control ” (
➔
68 ) set-
tings are both set to “ On ”.
• Refer to the connected component’s instruction manual for
details.
After changing the settings of the “ HDMI Con-
trol(RIHD) ”, “ Audio Return Channel ”, “ Power Con-
trol ”, or “ TV Control ”, turn off the power to all
connected pieces of equipment and then turn them on
again. Refer to the user’s manuals for all connected
pieces of equipment.