Integra DTR-70.2, Инструкция по эксплуатации

Страница: 61 / 124

61
En
■
Dynamic Volume
`
Off :
Audyssey Dynamic Volume
®
off.
`
Light :
Light Compression Mode becomes active.
`
Medium :
Medium Compression Mode becomes active.
`
Heavy :
Heavy Compression Mode becomes active. This set-
ting affects volume the most, causing all sounds to
be of equal loudness.
Note
• Even if you have selected other than “ Audyssey ” in “ Equalizer ”
setting after performing Audyssey MultEQ ® XT32 Room Cor-
rection and Speaker Setup, selecting “ On ” in the
“ Dynamic EQ ” will change the “ Equalizer ” setting to “ Audys-
sey ” (
➔
56 ).
• If you would like to use Audyssey Dynamic Volume, when
using THX listening modes, set “ Loudness Plus ” setting to
“ Off ” and set “ Preserve THX Settings ” setting to “ No ” (
➔
57 ).
• When “ Dynamic Volume ” is set to effective, “ Equalizer ” is set
to “ Audyssey ” (
➔
56 ) and “ Dynamic EQ ” is set to “ On ”.
When “ Dynamic EQ ” is set to “ Off ”, “ Dynamic Volume ”
becomes “ Off ” automatically.
• When “ Dynamic Volume ” is set to effective, the Dynamic Vol
indicator will light (
➔
9 ).
• If Direct listening mode is selected, these settings cannot be
selected.
• “ Dynamic EQ ” and “ Dynamic Volume ” settings cannot be
used while a pair of headphones is connected.
• When “ Dynamic EQ ” or “ Dynamic Volume ” is set to effective,
“ Dolby Volume ” will be set to “ Off ” (
➔
58 ).
Audyssey MultEQ XT32 then removes the distortion
caused by room acoustics by capturing room acoustical
problems over the listening area in both the frequency and
time domain. The result is clear, well-balanced sound for
everyone. Enabling Audyssey MultEQ XT32 allows you
to also use Audyssey Dynamic EQ
® , which maintains the
proper octave-to-octave balance at any volume level.
Before using this function, connect and position all of
your speakers.
About Audyssey Dynamic EQ
Audyssey Dynamic EQ solves the problem of deterio-
rating sound quality as volume is decreased by taking
into account human perception and room acoustics.
Dynamic EQ selects the correct frequency response and
surround levels moment-by-moment at any
user-selected volume setting. The result is bass
response, tonal balance, and surround impression that
remain constant despite changes in volume. Dynamic
EQ combines information from incoming source levels
with actual output sound levels in the room, a prerequi-
site for delivering a loudness correction solution.
Audyssey Dynamic EQ works in tandem with
Audyssey MultEQ XT32 to provide well-balanced
sound for every listener at any volume level.
About Audyssey Dynamic Volume
Audyssey Dynamic Volume solves the problem of large
variations in volume level between television programs,
commercials, and between the soft and loud passages of
movies. Dynamic Volume looks at the preferred volume
setting by the user and then monitors how the volume of
program material is being perceived by listeners in real
time to decide whether an adjustment is needed. When-
ever necessary, Dynamic Volume makes the necessary
rapid or gradual adjustments to maintain the desired
playback volume level while optimizing the dynamic
range. Audyssey Dynamic EQ is integrated into
Dynamic Volume so that as the playback volume is
adjusted automatically, the perceived bass response,
tonal balance, surround impression, and dialog clarity
remain the same whether watching movies, flipping
between television channels, or changing from stereo to
surround sound content.