background image

4

En

Thank you for purchasing an Integra AV receiver.
Please read this manual thoroughly before making con-
nections and plugging in the unit.
Following the instructions in this manual will enable you 
to obtain optimum performance and listening enjoyment 
from your new AV receiver.
Please retain this manual for future reference.

Supplied Accessories

Make sure you have the following accessories:

*

In catalogs and on packaging, the letter at the end of the prod-
uct name indicates the color. Specifications and operations are 
the same regardless of color. 

Installing the Batteries

Note

• If the remote controller 

doesn’t work reliably, try 
replacing the batteries.

• Don’t mix new and old 

batteries or different 
types of batteries.

• If you intend not to use 

the remote controller for 
a long time, remove the 
batteries to prevent dam-
age from leakage or corrosion.

• Remove expired batteries as soon as possible to prevent damage 

from leakage or corrosion.

Aiming the Remote Controller

To use the remote controller, point it at the AV receiver’s 
remote control sensor, as shown below.

Transmission

Received

Indoor FM antenna (

21)

AM loop antenna (

21)

Power cord (

21)

Speaker cable labels (

13)

Speaker setup microphone (

30)

Remote controller and two batteries (AA/R6)

Using the Remote Controller

Batteries (AA/R6)

Remote control sensor

AV receiver

Approx. 16 ft. (5 m)

15

15

Transmitter

AV receiver

Approx. 16 ft. (5 m)

Incoming sensor

Содержание DTR-70.2





























































































































Отзывы: