Integra DTR-70.2, Инструкция по эксплуатации

Страница: 52 / 124

52
En
Note
• For composite video, S-Video, and component video upconver-
sion for the HDMI output, the “ Monitor Out ” setting must be
set to other than “ Analog ” (
➔
50
), and the “ HDMI Input ” set-
ting must be set to “ - - - - - ”. See “Video Connection Formats”
for more information on video signal flow and upconversion
(
➔
22
).
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of “
Component Video Input ”.
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “Digital
Audio Input” (
➔
53
). In this case, if you want to use the coaxial
or optical audio input, make the selection in the “ Audio Selec-
tor ” in the Home menu (
➔
71 ).
• “ TUNER ” selector cannot be assigned and is fixed at the
“ - - - - - ” option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to “ PORT ” selector.
• Do not assign the component connected with the HDMI input to
“ TV/CD ” selector when you set “ TV Control ” setting to “ On ”
(
➔
68 ). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2 , you must assign “ IN 2 ” to
the “ BD/DVD ” input selector.
If you’ve connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are upcon-
verted
* and output by the COMPONENT VIDEO MONI-
TOR OUT *1 . You can set this for each input selector by
selecting the “ - - - - - ” option.
*1 This applies only when “ Monitor Out ” setting is set to “ Ana-
log ” (
➔
50
).
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , PC , AUX ,
TAPE , TV/CD , PHONO , PORT
`
IN 1 , IN 2 , IN 3 :
Select a corresponding component video input that
the video component has been connected.
`
- - - - - :
Select if you are using HDMI output, rather than the
COMPONENT VIDEO MONITOR OUT , for the
output from composite video, S-Video, and compo-
nent video sources.
Note
• For composite video and S-Video upconversion for the COM-
PONENT VIDEO MONITOR OUT
, the “ Monitor Out ” set-
ting must be set to “ Analog ” (
➔
50 ), and the “ Component
Video Input ” setting must be set to “ - - - - - ”. See “Video Con-
nection Formats” for more information on video signal flow and
upconversion (
➔
22 ).
• If not connected to the same output you have selected in the
“ Monitor Out ” setting, the “ Monitor Out ” setting will be auto-
matically switched to “ Analog ” (
➔
50 ).
• “ TUNER ” selector cannot be assigned and is fixed at the
“ - - - - - ” option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to “ PORT ” selector.
Input selector Default assignment
BD/DVD IN 1
VCR/DVR - - - - -
CBL/SAT IN 2
GAME IN 3
PC - - - - -
AUX - - - - -
TAPE - - - - -
TUNER - - - - - (Fixed)
TV/CD - - - - -
PHONO - - - - -
PORT - - - - -
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video