Integra DTR-70.2 Скачать руководство пользователя страница 16

Страница: 16 / 124

Bridging the Front Speakers

The

FRONT L/R

and

SURR BACK/ZONE 3 L/R

terminal

posts can be used with front speakers and surround back speak-
ers respectively, or bridged together to provide almost double
the output power for the front speakers.
• When bridging is used, surround back speakers cannot be

used.

• For bridging, the positive (+)

FRONT L/R

and

SURR

BACK/ZONE 3 L/R

terminal posts are used, but the negative

(–)

FRONT L/R

and

SURR BACK/ZONE 3 L/R

terminals

are not.

• Once you’ve completed the bridging connections shown below

and turned on the AV receiver, you must set the
“

Speakers Type(Front)

” setting to “

BTL

” to enable bridging

(

➔

Note

• Use only front speakers with an impedance of 8 ohms or higher for bridging. Failure to do so may seriously damage the AV

receiver.

• When using bridging, make sure that your front speakers can handle the additional power.

Connecting the Passive Subwoofers

The

FRONT WIDE/ZONE 2 L/R

terminal posts can be

used with front wide speakers or passive subwoofers.
• Once you’ve connected the passive subwoofers and

turned on the AV receiver, you must set the “

Passive

Subwoofer

” setting to “

Use

” (

➔

• When the passive subwoofers are used, the Powered

Zone 2/4 cannot be used.

• If you use one passive subwoofer, connect it to the

SUBWOOFER1

terminals.

Connecting a Power Amplifier

If you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the

PRE OUT

jacks, and connect all speakers to the power amplifier.

Left speaker

Right speaker

Subwoofer 2

Subwoofer 1

FRONT HIGH OR
FRONT WIDE

FRONT

HIGH/

WIDE

CENTER

FRONT

CENTER

SURR

SURR BUCK

PRE OUT

Front left speaker

Center speaker

Front right speaker

Surround left speaker

Surround right speaker

Surround back left speaker

Surround back right speaker

Front high/Front wide left speaker

Front high/Front wide right speaker

Note

• Specify “

None

” for the channel that you don’t want to output

(

➔

Power amplifier

Содержание DTR-70.2





























































































































Результаты поиска

Содержание DTR-70.2

Отзывы:

Похожие инструкции для DTR-70.2

Бренды по названию

Популярные бренды

Integra DTR-70.2, Инструкция по эксплуатации

Результаты поиска

Содержание DTR-70.2

Отзывы:

Похожие инструкции для DTR-70.2

Бренды по названию

Популярные бренды